Obtenção por tratamento a laser e caracterização de composito superficial em aços inoxidaveis duplex fundidos
Alex Maia do Nascimento
TESE
Português
T/UNICAMP N17o
[Obtaining by laser treatment and characterization of superface composite on cast duplex stainless steels]
Campinas, SP : [s.n.], 2007.
120p. : il.
Orientador: Maria Clara Filippini Ierardi
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Resumo: Neste trabalho estudaram-se as relações de orientação entre a austenita e ferrita de três aços inoxidáveis duplex fundidos, ASTM A890 1A, 3A e 6A, na condição solubilizada. Logo após, tratamentos superficiais de refusão a laser simples (RL) e com injeção simultânea de partículas cerâmicas...
Ver mais
Resumo: Neste trabalho estudaram-se as relações de orientação entre a austenita e ferrita de três aços inoxidáveis duplex fundidos, ASTM A890 1A, 3A e 6A, na condição solubilizada. Logo após, tratamentos superficiais de refusão a laser simples (RL) e com injeção simultânea de partículas cerâmicas (RLI) foram realizados sobre as ligas. As mudanças microestruturais e os efeitos dos tratamentos sobre as propriedades de dureza, resistência ao desgaste e à corrosão das ligas foram analisadas. As mudanças microestruturais foram caracterizadas por microscopia ótica, microscopia eletrônica de varredura com detectores de EDAX e EBSD acoplados, difração de raios-X e microdureza Vickers. Realizaram-se ensaios de desgaste do tipo pino sobre disco sobre as três ligas, nas condições superficiais: inicial, RL e RLI. A análise do comportamento corrosivo das ligas, antes e após os tratamentos a laser, foi realizada usando-se ensaios de polarização em solução de 0,5M de H2SO4 + 0,5M de NaCl na temperatura ambiente. Os resultados obtidos mostraram que as ligas na condição inicial apresentaram a existência de relações de orientação preferenciais entre a austenita e a ferrita, próxima aos modelos teóricos de Greninger-Troiano, Kurdjumov-Sachs e Bain. As superfícies tratadas por laser, apresentaram mudanças microestruturais significativas, as quais produziram durezas e resistências ao desgaste superiores as da condição inicial, e com a manutenção da elevada resistência à corrosão típica dos aços inoxidáveis duplex
Ver menos
Abstract: In this work was studied the orientation relations between austenite and ferrite in three cast duplex stainless steels, ASTM A890 1A, 3A, 6A on solution treatment. After that, simple laser surface remelting (LR) and laser melt injection (LMI) treatments were carried out on the alloys. The...
Ver mais
Abstract: In this work was studied the orientation relations between austenite and ferrite in three cast duplex stainless steels, ASTM A890 1A, 3A, 6A on solution treatment. After that, simple laser surface remelting (LR) and laser melt injection (LMI) treatments were carried out on the alloys. The microstructural changes and the effects of laser treatments on hardness, wear resistance and corrosion resistance properties were analyzed. The microstructural changes were investigated by means of optical microscopy, scanning electron microscopy with integrated EDS and EBSD systems, X-ray diffraction and Vickers microhardness. The wear properties were measured by pin-on-disc tests on the three alloys in all different conditions : initial, LR and LMI. In order to analyze the corrosive behavior of the alloys before and after the treatments, polarization tests were carried out in the 0,5M de H2SO4 + 0,5M de NaCl solution at room temperature. The results obtained showed that the austenite and ferrite of alloys in the initial condition have orientation relations close to Greninger-Troiano, Kurdjumov-Sachs and Bain theoritical models. However, the laser treated surfaces showed accentuated microstructural changes and the microhardness and wear resistance were increased in comparing with the wear of the substrate. The three alloys in all conditions showed an excellent corrosion resistance what it is typical for the duplex stainless steels
Ver menos
Ierardi, Maria Clara Filippini, 1951-
Orientador
Tavares, Sergio Souto Maior
Avaliador
Casteletti, Luiz Carlos
Avaliador
Garcia, Amauri, 1949-
Avaliador
Freire, Celia Marina de Alvarenga, 1960-
Avaliador
Obtenção por tratamento a laser e caracterização de composito superficial em aços inoxidaveis duplex fundidos
Alex Maia do Nascimento
Obtenção por tratamento a laser e caracterização de composito superficial em aços inoxidaveis duplex fundidos
Alex Maia do Nascimento
Exemplares
Nº de exemplares: 2
Não existem reservas para esta obra