Avaliação da resistencia ao cisalhamento da resina composta e do cimento de ionomero de vidro na fixação de braquetes metalicos
Heloisa Cristina Valdrighi
TESE
Português
(Broch.)
T/UNICAMP V233a
Piracicaba, SP : [s.n.], 2002.
119p. : il.
Orientador: Darcy Flavio Nouer, Simonides Consani
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Resumo: O objetivo desta pesquisa foi avaliar a resistência ao cisalhamento da resina composta e do cimento de ionômero de vidro na fixação de diferentes tipos - de bráquetes metálicos (Morelli, Abzil-Lancer, Dentaurum e GAC). Foram utilizados 120 pré-molares humanos. As faces vestibulares de 80...
Ver mais
Resumo: O objetivo desta pesquisa foi avaliar a resistência ao cisalhamento da resina composta e do cimento de ionômero de vidro na fixação de diferentes tipos - de bráquetes metálicos (Morelli, Abzil-Lancer, Dentaurum e GAC). Foram utilizados 120 pré-molares humanos. As faces vestibulares de 80 prémolares receberam condicionamento ácido e os bráquetes foram fixados utilizando Concise Ortodôntico e Transbond XT, enquanto em outros 40 prémolares, os bráquetes foram fixados com Fuji Ortho LC. As amostras foram armazenadas em solução de soro fisiológico a 0,9% a 37°C por 24 horas. Em seguida, foram submetidas ao teste de resistência ao cisalhamento em uma máquina Instron, com velocidade de 0,5mm/min. Os resultados foram submetidos à análise de variância e ao teste de Tukey (p<0,05). Associando sistemas adesivos aos respectivos bráquetes, os resultados mostraram que: a) com o Concise ortodôntico, a resistência (kgf/mm 'POT. 2¿)do bráquete GAC (1,698) foi significantemente maior que os bráquetes Abzil-Lancer (1,353), Dentaurum (1,293) e Morelli (0,828), que apresentou a menor média; b) com o Transbond XT, observou-se que os bráquetes Dentaurum (1,082) e GAC (1,225) apresentaram médias significantemente maiores do que os bráquetes Morelli (0,583) e Abzil-Lancer (0,621); e, c) com o Fuji Ortho LC, não foram observadas diferenças entre as médias dos diferentes bráquetes testados (Morelli=0,301, Abzil-Lancer=0,309, Dentaurum 0,230 e GAC=0,338). Os autores concluíram que o Concise Ortodôntico apresentou maiores valores de resistência ao cisalhamento, seguidos do Transbond XT e Fuji Ortho LC. O bráquete GAC apresentou maior resistência em todos os materiais e o bráquete Morelli a menor resistência
Ver menos
Abstract: The aim of this study was to evaluate the shear bond strength of composites and glass ionomer cement of different metallic brackets bonding (Morelli, Abzil-Lancer, Dentaurum e GAC). One hundred and twenty human premolars were used. For eighty premolars, the vestibular faces were etched and...
Ver mais
Abstract: The aim of this study was to evaluate the shear bond strength of composites and glass ionomer cement of different metallic brackets bonding (Morelli, Abzil-Lancer, Dentaurum e GAC). One hundred and twenty human premolars were used. For eighty premolars, the vestibular faces were etched and were bonded to enamel surface using Concise Ortho and Transbond XT, whereas in others forty premolars the brackets were bonded with Fuji Ortho LC in the vestibular faces without acid etching. All samples were stored in fisiologic solution 0,9% at 37°C for 24 hours. Afier the sample were submitted to shear bond strength in an Instron at a crosshead speed of 0.5 mm/min. The results were submitted to ANOVA and Tukey's test (p<0.05). Associating adhesives systems to respective brackets, the data indicated that: a) with Concise Ortho, the strengths (kgt/mm¿POT. 2¿) of GAC bracket (1.698) was significant1y higher than Abzil-Lancer (1.353), Dentaurum (1.293) and Morelli (0.828) brackets; b) with Transbond XT, Dentaurum (1.082) and GAC (1.225) brackets showed average higher than Morelli (0.583) and Abzil-Lancer (0.621); and, c) with Fuji Ortho LC, it wasn't showed difference between the average of different brackets tested (Morelli=0.301, Abzil-Lancer=0.309, Dentaurum 0.230 and GAC=0.338). The authors concluded that the Concise Ortho showed highest shear bond strength values followed by Transbond XT and Fuji Ortho LC. The GAC bracket showed higher strength in alI adhesives systems and the Morelli bracket the lowest strength
Ver menos
Nouer, Darcy Flávio, 1937-
Orientador
Consani, Simonides, 1939-
Coorientador
Nouer, Paulo Roberto Aranha
Avaliador
Vedovello Filho, Mário
Avaliador
Martins, Luís Roberto Marcondes, 1960-
Avaliador
Correr Sobrinho, Lourenço, 1960-
Avaliador
Avaliação da resistencia ao cisalhamento da resina composta e do cimento de ionomero de vidro na fixação de braquetes metalicos
Heloisa Cristina Valdrighi
Avaliação da resistencia ao cisalhamento da resina composta e do cimento de ionomero de vidro na fixação de braquetes metalicos
Heloisa Cristina Valdrighi
Exemplares
Nº de exemplares: 1
Não existem reservas para esta obra