Avaliação in vitro da infiltração marginal e da microdureza em restaurações classe II realizadas com diferentes sistemas restauradores e tecnicas de inserção
Andre Luis Fraga Briso
TESE
Português
(Broch.)
T/UNICAMP B774a
Piracicaba, SP : [s.n.], 2001.
133p. : il.
Orientadores: Luiz Andre Freire Pimenta, Renato Herman Sundfeld
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Resumo: O objetivo deste trabalho foi avaliar a microinfiltração e a microdureza Knoop em restaurações classe II, quando empregadas 5 combinações de sistemas restauradores (Bond-1® Prime/Adesivo + ALERT; Bond -1® Prime/Adesivo + FLOW-IT + ALERT; Etch & Prime® 3.0 + DEFINITE; Prime & Bond NT +...
Ver mais
Resumo: O objetivo deste trabalho foi avaliar a microinfiltração e a microdureza Knoop em restaurações classe II, quando empregadas 5 combinações de sistemas restauradores (Bond-1® Prime/Adesivo + ALERT; Bond -1® Prime/Adesivo + FLOW-IT + ALERT; Etch & Prime® 3.0 + DEFINITE; Prime & Bond NT + SUREFIL; e Solid Bond P + Solid Bond S + CHARlSMA) e 2 técnicas de inserção (incrementos horizontais e de incremento único). Para tanto, 230 cavidades tipo "slot" vertical confeccionadas nas faces mesial e distal com margens em dentina foram divididas aleatoriamente em 10 grupos, segundo o sistema restaurador e a técnica empregada. Após a execução das restaurações e do polimento, os dentes foram sujeitos a 2000 ciclos térmicos (5 ± 2°C e 55 ± 2°C). Em seguida, foram cobertos com esmalte para unha, com exceção das margens cervicais e do milímetro que as circunscreviam. Logo após, os dentes foram imersos em solução de azul de metileno a 2% por 4 horas, sendo, em seguida, seccionados e avaliados conforme o grau e o padrão de penetração da solução evidenciadora. Os cortes obtidos foram utilizados para análise da microdureza em diferentes profundidades. Para a avaliação da microinfiltração empregou se o teste de Kruskal-W allis, enquanto que para os valores do padrão de penetração foi usado o teste Exato de Fisher. A análise da microdureza foi submetida aos testes ANOV A e de Tukey. Observou-se que: nenhuma técnica ou material restaurador foi capaz de impedir a ocorrência de infiltração marginal em restaurações classe II, com margens em dentina; a variação das técnicas restauradoras não afetou o desempenho da resina de baixa viscosidade, FLOW-IT, associada ao material ALERT no controle da microinfiltração; todos materiais analisados se comportaram de forma semelhante no controle da infiltração marginal, quando se empregou a técnica de incremento único; a resina composta SUREFIL controlou de forma mais efetiva a ocorrência de infiltração marginal quando a técnica incremental foi empregada; a penetração de corante em tecido dentinário não foi influenciada pela técnica restauradora; o material ALERT não foi capaz de ser polimerizado de forma uniforme em incrementos superiores a 2mm, com 120 segundos de exposição à luz halógena
Ver menos
Abstract: The objective of this study was to evaluate the microleakage and the Knoop microhardness in class II restorations when using 5 combinations of restorative systems (Bond - 1® Prime/Adesive + ALERT; Bond - 1® Prime/Adesive + FLOW-IT + ALERT; Etch & Prime® 3.0 + DEFINITE; Prime & Bond NT +...
Ver mais
Abstract: The objective of this study was to evaluate the microleakage and the Knoop microhardness in class II restorations when using 5 combinations of restorative systems (Bond - 1® Prime/Adesive + ALERT; Bond - 1® Prime/Adesive + FLOW-IT + ALERT; Etch & Prime® 3.0 + DEFINITE; Prime & Bond NT + SUREFIL; and Solid Bond P + Solid Bond S + CHARISMA) and 2 restorative techniques (horizontal increments and bulk insertion). The 230 cavities with dentine margins were randomly divided into 10 groups according to the restorative systems and the technique used. After the restorative
Ver menos
nd polishing procedures, the teeth were subject to 2000 thermo cycles (5 ± 2°C e 55 ± 2°C). Next, they were covered with nail polish except for the cervical margins and 1lm around it. Afterwards, the teeth were immersed in a 2% methylene blue solution for 4 hours, sectioned and classified according...
Ver mais
nd polishing procedures, the teeth were subject to 2000 thermo cycles (5 ± 2°C e 55 ± 2°C). Next, they were covered with nail polish except for the cervical margins and 1lm around it. Afterwards, the teeth were immersed in a 2% methylene blue solution for 4 hours, sectioned and classified according to the degree and standard of penetration evidenced by the solution. The surfaces obtained were used for the microhardness analysis at different depths. For the microleakage test was used the Kruskal Wallis statistical test, while the values of standard analysis of microleakage were submitted to the Exact Fisher test. The evaluation of microhardness was submitted to ANOV A and Tukey tests. It was observed that no technique or restorative system stopped the occurrence of marginal leakage; the variations of restorative techniques tested did not affect the performance of the low viscosity resin, FLOW-IT, when associated with the ALERT material in the control of microleakage; all materials tested behaved in a similar manner in the control of marginal leakage when the bulk incremental technique was employed; the SUREFIL resin more effectively controlled the occurrence of marginal leakage when the incremental technique was used; the penetration of the dye in dentinal tissue was not influenced by the restorative technique; the ALERT material was not able to uniformly polymerize in increments higher than 2mm with 120 seconds of halogen light exposure
Ver menos
Pimenta, Luiz Andre Freire, 1965-
Orientador
Sundfeld, Renato Herman
Coorientador
Mauro, Silvio Jose
Avaliador
Komatsu, Jorge
Avaliador
Baron, Giselle Maria Marchi, 1970-
Avaliador
Sinhoreti, Mário Alexandre Coelho, 1969-
Avaliador
Avaliação in vitro da infiltração marginal e da microdureza em restaurações classe II realizadas com diferentes sistemas restauradores e tecnicas de inserção
Andre Luis Fraga Briso
Avaliação in vitro da infiltração marginal e da microdureza em restaurações classe II realizadas com diferentes sistemas restauradores e tecnicas de inserção
Andre Luis Fraga Briso
Exemplares
Nº de exemplares: 1
Não existem reservas para esta obra