Influência das temperaturas de cocção de porcelanas no desajuste cervical de copings em titânio comercialmente puro e ligas titânio-alumínio-vanádio e paládio-prata
Johnson Campideli Fonseca
DISSERTAÇÃO
Português
T/UNICAMP F733i
Piracicaba, SP : [s.n.], 2001.
125 p. : il.
Orientador : Guilherme Elias Pessanha Henriques
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Resumo: A utilização do titânio e suas ligas em prótese tem aumentado nos últimos anos do conjunto de propriedades físico-químicas que exibem, sendo escassas as >rmaçôes a respeito da adaptação cervical de restaurações fundidas. Este estudo objetivou: 1) determinar o desajuste cervical de copings...
Ver mais
Resumo: A utilização do titânio e suas ligas em prótese tem aumentado nos últimos anos do conjunto de propriedades físico-químicas que exibem, sendo escassas as >rmaçôes a respeito da adaptação cervical de restaurações fundidas. Este estudo objetivou: 1) determinar o desajuste cervical de copings fundidos em comercialmente puro (Ti c.p.) e iigas titánio-aiumínio-vanádio (ÏÎ-6AI-4V) e paládio-prata (Pd-Ag); 2) avaliar a influência do ciclo de cocção das porcelanas preconizadas sobre o desajuste cervical dos copings fundidos em Ti c.p. e ligas TÍ-6A1-4V e Pd-Ag; 3) avaliar a aneíusão) sobre o desajuste cervical dos copings fundidos em Ti c.p. e bga TÏ-6A1-4V. s típicos para restaurações as {altura de 5mm; término cervical em ombro 90° e largura de l,5mm; erimentais Ti-óAMV, TÍ-6A1-4V com tratamento térmico (TÍ-6A1-4V TT), Ti c.p.. Ti érmico (Ti c.p. TT) e Pd-Ag. Os copings em Ti c.p. e liga TÍ-6A1-4V pelo sistema Rematitan (Dcntaurum). O tratamento térmico experimental s TÍ-6A3-4V TT e Ti c.p. TT) foi realizado nas inclusões originais à temperatura do aquecimento da porcelana (800°C). O desajuste cervical tbi medido com auxilio metidos à Análise de Variância (ANOVA) e teste de Tukey, com nível de probabilidade 5%. Os valores médios de desajuste cervical obtidos ao final dos ciclos de cocção 78um para TÍ-6A1-4V, 86,02 urn para TÍ-6A1-4V TT, 117,22um para Ti c.p., para Ti c.p. TT e 9S,70um para Pd-Ag, sem que houvesse diferença significativa entre tais valores. O desajuste cervical dos grupos m Ti c.p. e TÍ-6AÍ-4V não foi influenciado de forma significante pelo ciclo de cocção da porcelana Vitatitankramic. O grupo Pd-Ag mostrou alternação estatisticamente significativa apos a cocção da porcelana para dentina e glaze
Ver menos
Abstract: The application of titanium and titanium alloys in prosthetic dentistry has increased in the past few years because of their physical and chemical properties; however, few studies have investigated the marginal fit of cast restorations. This study evaluated: 1) the marginal fit of copings...
Ver mais
Abstract: The application of titanium and titanium alloys in prosthetic dentistry has increased in the past few years because of their physical and chemical properties; however, few studies have investigated the marginal fit of cast restorations. This study evaluated: 1) the marginal fit of copings obtained in commercially pure titanium (c.p. Ti), thanium-aluminurn-vanadiurn (Ti-6A1-4V) and palladium-silver (Pd-Ag) alloys; 2) the influence of firing cycle of recommended porcelains in the marginal fit of c.p. Ti, Ti-6A1-4V and Pd-Ag alloys; 3) the effectiveness of additional heating at the first temperature of firing cycle in the marginal fit of Ti c.p. and Ti-6A1-4V copings. Fifty bovine teeth with standardized preparations for metal-ceramic crowns (length of 5mm; axial taper of 8°; shoulder of 1,5mm) were used and divided in T1-6A1-4V, Ti-6A1-4V with additional heat (Ti-6A1-4V TT), Ti c.p., Ti c.p. with additional heat (Ti c.p. TT) and Pd-Ag experimental groups. The copings for commercially pure titanium and titanium-aluminum-vanadium alloy were obtained in Rematitan System (Dentaurum). The experimental additional heat (Ti-6Ai-4V TT and Ti c.p. TT) was performed in original invested castings at first tiring porcelain temperature (800°C). The marginal fit was measured with the use of a measuring microscope (Olympus STM). The mean values of copings marginal fit were subjected lo analysis of variance (AN OVA) and Tukey's test with statistical significance set at the 5% probability level. The mean values of marginal fit after the complete firing cycle were: 106,78nm to Ti-6AI-4V, 86,02um to Ti-6AI-4V TT. 117,22fim to Ti c.p,, 115,71 um Ti c.p. TT and 98,70um to Pd-Ag, with no significant differences between these experimental groups. The marginal fit of Ti c.p. and Ti-6A1-4V was not significant influenced by Vitalitankeramic firing cycle. The Pd-Ag group revealed significant changes in marginal fit after firing of dentin porcelain and glaze
Ver menos
Influência das temperaturas de cocção de porcelanas no desajuste cervical de copings em titânio comercialmente puro e ligas titânio-alumínio-vanádio e paládio-prata
Johnson Campideli Fonseca
Influência das temperaturas de cocção de porcelanas no desajuste cervical de copings em titânio comercialmente puro e ligas titânio-alumínio-vanádio e paládio-prata
Johnson Campideli Fonseca
Exemplares
Nº de exemplares: 1
Não existem reservas para esta obra