Uma contribuição ao estudo do processo de brunimento
Edivaldo Jose Visque
DISSERTAÇÃO
Português
T/UNICAMP V826c
Campinas, SP : [s.n.], 1998.
79f. : il.
Orientador: Olivio Novaski
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Resumo: o processo de brunimento apresenta vários parâmetros de usinagem, cujas influências necessitam ser melhor conhecidas. Tais parâmetros compreendem a velocidade de corte, a pressão de contato e a velocidade de avanço, cujas influências se fazem sentir nos desvios macro e micro geométricos. O...
Ver mais
Resumo: o processo de brunimento apresenta vários parâmetros de usinagem, cujas influências necessitam ser melhor conhecidas. Tais parâmetros compreendem a velocidade de corte, a pressão de contato e a velocidade de avanço, cujas influências se fazem sentir nos desvios macro e micro geométricos. O presente trabalho procurou analisam as influências da velocidade de corte e da pressão de contato, mantendo-se invariável a velocidade de avanço. Os experimentos foram divididos em três fases, quais sejam, a fase I, onde para um determinado valor de velocidade de corte, de velocidade de avanço e pressão de contato, utilizadas no processo normal de brunimento em análise, verificou-se o efeito da pré-usinagem. A fase II teve o propósito de verificar a influência da pressão de contato e a fase III objetivou a verificação da influência da velocidade de corte nos desvios. Os resultados mostram que, os desvios iniciais influenciam na porcentagem de correção dos mesmos. Da mesma maneira, a variação dos parâmetros estudados influenciam os resultados finais, sendo que, no presente caso, o aumento de tais parâmetros, atuou de maneira positiva
Ver menos
Abstract: The honing process presents several manufacturing parameters, whose influences need to be known better. Such parameters comprehend the cutting speed, the contact pressure and the infeed speed, whose influences appear in the macro and micro geometric deviations. The present study tried to...
Ver mais
Abstract: The honing process presents several manufacturing parameters, whose influences need to be known better. Such parameters comprehend the cutting speed, the contact pressure and the infeed speed, whose influences appear in the macro and micro geometric deviations. The present study tried to analyze the influences of the cutting speed and the contact pressure,
keeping invariable the infeed speed. The experiments were divided in three to phases. Phase I, at a certain value of cutting speed, infeed speed and contact pressure, used in the normal process of honing analyzed, the pre-manufacturing effect was verified. The purpose of phase II was to verify the contact pressure influence and the phase III aimed the influence verification of the cutting speed at the deviations. The results showed that, the initial deviations influence this correction percentage in the same way, the variation of the studied parameters influence the final results and at the present case, the increase of such parameters acted in a positive way Ver menos
keeping invariable the infeed speed. The experiments were divided in three to phases. Phase I, at a certain value of cutting speed, infeed speed and contact pressure, used in the normal process of honing analyzed, the pre-manufacturing effect was verified. The purpose of phase II was to verify the contact pressure influence and the phase III aimed the influence verification of the cutting speed at the deviations. The results showed that, the initial deviations influence this correction percentage in the same way, the variation of the studied parameters influence the final results and at the present case, the increase of such parameters acted in a positive way Ver menos
Uma contribuição ao estudo do processo de brunimento
Edivaldo Jose Visque
Uma contribuição ao estudo do processo de brunimento
Edivaldo Jose Visque
Exemplares
Nº de exemplares: 2
Não existem reservas para esta obra