Otimização do fluxo de aço no distribuidor do lingotamento continuo
Joaquim Gonçalves Costa Neto
TESE
Português
T/UNICAMP C823o
Campinas, SP : [s.n.], 1997.
147f. : il.
Orientador: Amauri Garcia
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Resumo: Este trabalho trata da otirnização do escoamento de aço no distribuidor do lingotamento contínuo, cujo objetivo é a melhoria da qualidade interna do aço, através do decréscimo no nível de inclusões. A otirnização do escoamento é obtida através do posicionamento de barreiras no distribuidor....
Ver mais
Resumo: Este trabalho trata da otirnização do escoamento de aço no distribuidor do lingotamento contínuo, cujo objetivo é a melhoria da qualidade interna do aço, através do decréscimo no nível de inclusões. A otirnização do escoamento é obtida através do posicionamento de barreiras no distribuidor. Neste trabalho, foram realizados testes de simulação de fluxo de aço, utilizando modelo físico 1:3 do distribuidorda Companhia Siderúrgica Belgo-Mineira em João Monlevade-MG, para escolha de melhor configuração de barreiras. Visualização do fluxo de aço usando permanganato de potássio como corante na água e levantamentode curvas Distribuição do Tempo de Residência (DTR) por medidas de condutividade, usando cloreto de potássio, foram os meios empregados na escolha da melhor configuração de barreiras. Foi implantada, no distribuidor escala industrial, uma configuração de barreiras contendo seis barragens. Determinações de inclusão e medidas de oxigênio total para aço acalmado ao aluminio são apresentadas
Ver menos
Abstract: This investigation deals with the optimization of the flow in tundish of the continuous casting, the aim being the improvement of the internal quality of the steel, by better cleanliness of the steel. The optimisation of the flow is brought by the use of barriers in the tundish. During...
Ver mais
Abstract: This investigation deals with the optimization of the flow in tundish of the continuous casting, the aim being the improvement of the internal quality of the steel, by better cleanliness of the steel. The optimisation of the flow is brought by the use of barriers in the tundish. During this investigation, simulations were done using 1:3 model of the Belgo Mineira tundish, potassium
permanganate was used for flow visualisation and potassium chloride was used as tracer for RTD (Residence Time Distribution) study. A six weirs configuration was employed in the industrial tundish. Measurements of inclusions and values of total oxygen in a aluminum killed steel at the industrial plant are presented. Ver menos
permanganate was used for flow visualisation and potassium chloride was used as tracer for RTD (Residence Time Distribution) study. A six weirs configuration was employed in the industrial tundish. Measurements of inclusions and values of total oxygen in a aluminum killed steel at the industrial plant are presented. Ver menos
Garcia, Amauri, 1949-
Orientador
Ierardi, Maria Clara Filippini, 1951-
Avaliador
Moura Neto, Carlos de
Avaliador
Silva, Carlos Antonio
Avaliador
Assis, Paulo Santos
Avaliador
Otimização do fluxo de aço no distribuidor do lingotamento continuo
Joaquim Gonçalves Costa Neto
Otimização do fluxo de aço no distribuidor do lingotamento continuo
Joaquim Gonçalves Costa Neto
Exemplares
Nº de exemplares: 2
Não existem reservas para esta obra