Agradecimentos: We want to thank the Brazilian Nanotechnology National Laboratory (LNNano), CNPEM/MCTIC and Brazilian Synchrotron Light Laboratory (LNLS) CNPEM/MCTIC for the use of the SEM/EBSD and the XTMS beamline, respectively. Authors acknowledge FAPESP (2017/17697-5), FAPESP (2008/57863-0),...

Agradecimentos: We want to thank the Brazilian Nanotechnology National Laboratory (LNNano), CNPEM/MCTIC and Brazilian Synchrotron Light Laboratory (LNLS) CNPEM/MCTIC for the use of the SEM/EBSD and the XTMS beamline, respectively. Authors acknowledge FAPESP (2017/17697-5), FAPESP (2008/57863-0), FAPESP (2014/20844-1), FAPESP (2019/00691-0) and CNPq (573661/2008-1), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001. J. P. Oliveira acknowledges Fundação para a Ciência e Tecnologia (FCT) for its financial support through the project UID/EMS/00667/2019. The chemical composition measurements were conducted at VILLARES METALS

Abstract: Reverted austenite is a metastable phase that can be used in maraging steels to increase ductility via transformation-induced plasticity or TRIP effect. In the present study, 18Ni maraging steel samples were built by selective laser melting, homogenized at 820 °C and then subjected to...

Abstract: Reverted austenite is a metastable phase that can be used in maraging steels to increase ductility via transformation-induced plasticity or TRIP effect. In the present study, 18Ni maraging steel samples were built by selective laser melting, homogenized at 820 °C and then subjected to different isothermal tempering cycles aiming for martensite-to-austenite reversion. Thermodynamic simulations were used to estimate the inter-critical austenite + ferrite field and to interpret the results obtained after tempering. In-situ synchrotron X-ray diffraction was performed during the heating, soaking and cooling of the samples to characterize the martensite-to-austenite reversion kinetics and the reverted austenite stability upon cooling to room temperature. The reverted austenite size and distribution were measured by Electron Backscattered Diffraction. Results showed that the selected soaking temperatures of 610 °C and 650 °C promoted significant and gradual martensite-to-austenite reversion with high thermal stability. Tempering at 690 °C caused massive and complete austenitization, resulting in low austenite stability upon cooling due to compositional homogenization

COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPES

001

CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQ

573661/2008-1

FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP

2008/57863-0; 2014/20844-1; 2017/17697-5; 2019/00691-0

Fechado