The present investigation deals with directional solidification (DS) of Al-15 wt% and 18 wt% Si alloys under transient heat flow conditions and further characterization of the related microstructures. Emphasis is given on the eutectic growth being affected not only by solidification kinetics but also by melt superheat, which is varied in two degrees for each alloy, i.e., 6% and 23% above the liquidus temperature. The dependences of interphase spacing (λ) on both solidification kinetics (fast, intermediate and slow cooling conditions) and on melt superheat during solidification of hypereutectic alloys are reported for the first time. Furthermore, functional experimental interrelations of tensile mechanical properties and interphase spacing between eutectic Si particles of both alloys evaluated are proposed. It is shown by these correlations that the tensile properties increase with the decrease in these spacings. More significant variations in properties are associated with a certain range of spacings (1.0 µm <λ<2.3 µm) in the case of the Al-15 wt%Si alloy. Tensile strength and elongation-to-fracture decrease with increasing alloy silicon content. The applicability of the eutectic growth expression λ=f (V−1/2) has been verified for the present tested alloys and experimental conditions Ver menos