Comportamento fluidodinamico do ciclone em diferentes geometrias
Alessandro Dibb
DISSERTAÇÃO
Português
T/UNICAMP D544c
Campinas, SP : [s.n.], 1997.
67f. : il.
Orientador: Maria Aparecida Silva
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica
Resumo: O presente trabalho trata do estudo da influência da geometria do ciclone no seu comportamento fluidodinâmico. O escoamento gás-particulas no interior do bidimensional e turbulento, onde a fase particulada é tratada como um continuum. Adimitiu-se, com viscosidade turbulenta variável. Como...
Ver mais
Resumo: O presente trabalho trata do estudo da influência da geometria do ciclone no seu comportamento fluidodinâmico. O escoamento gás-particulas no interior do bidimensional e turbulento, onde a fase particulada é tratada como um continuum. Adimitiu-se, com viscosidade turbulenta variável. Como condição de Navier-Stokes foram escritas em coordenadas cilíndricas. A solução numérica das equações foi obtida utilizando-se o algoritmo SIMPLE, onde as equações discretizadas foram obtidas pela integração das equações diferenciais no volume de controle, usando-se par o esquema ¿power-law¿. Os resultados obtidos demonstram que o comportamento fluidodinâmico do ciclone é fortemente afetado pela geometria do mesmo, influenciando no tempo de residência das partículas. A medida em que o ângulo diminui, a altura da parte cilíndrica aumenta e, principalmente o diâmetro aumenta, o tempo de residência das partículas aumenta, indicando que a geometria deve ser modificada dependendo do uso que se quiser dar ao ciclone
Ver menos
Abstract: In this work, it was the cyclone geometry influence in this fluidynamics behavior. A mathematical model was developed to simulated the gas-particles flow in a cyclone, considering a two-dimensional turbulent gas-particle flow and using a continuum model for particle phase. The boundary...
Ver mais
Abstract: In this work, it was the cyclone geometry influence in this fluidynamics behavior. A mathematical model was developed to simulated the gas-particles flow in a cyclone, considering a two-dimensional turbulent gas-particle flow and using a continuum model for particle phase. The boundary conditions were considered the particles slipness on the cyclone wall. The Navier-Stokes equations were written in cylindrical coordinates. The numerical solution was obtained using SIMPLE algorithm. The results showed that fluidynamics behavior of the cyclone is strongly affected by geometry, influencing on the permanence time of the particles. While the angle decreases, the cylindrical part height increases and, mainly, as the diameter increases the permanence time of the particles increases, showing that the geometry should be modified begin conditioned on the use we would like to give the cyclone
Ver menos
Comportamento fluidodinamico do ciclone em diferentes geometrias
Alessandro Dibb
Comportamento fluidodinamico do ciclone em diferentes geometrias
Alessandro Dibb
Exemplares
Nº de exemplares: 2
Não existem reservas para esta obra