Please use this identifier to cite or link to this item:
|Type:||Artigo de evento|
|Title:||Modeling And Simulation Of Molecular Distillation Process For A Heavy Petroleum Cut|
Wolf Maciel M.R.
Maciel Filho R.
|Abstract:||Modeling and simulation of molecular distillation to split of heavy petroleum cuts are proposed. A theoretical study of this problem is illustrated for a heavy petroleum cut divided into six pseudo-components. In the process simulation, a falling film is considered. The mathematical model comprises equations for the evaluation of the physicochemical properties, in order to characterize the distilled mixture. Heat and material balances on the liquid film are numerically solved by using a central finite-difference method. The simulation is carried out at the steady-state conditions, where the relevant process variables, such as film thickness, evaporation rate, film surface temperature, concentration profiles, and amount of distillate flow rate are computed. In molecular distillation, the concentration of the most volatile components shrinks in both axial and radial directions, especially due to the fast increase of the temperature in the falling film. As a consequence, the less volatile components of the liquid mixture undergoes a fast increase on the liquid interface, by clearly showing the potentialities of the molecular distillation process in separating heavy petroleum cuts. As the results show, the inlet variables such as the feed temperature and the feed flow rate largely influence the final composition of the condensate flow. Copyright © 2009, AIDIC Servizi S.r.l.|
|Editor:||Italian Association of Chemical Engineering - AIDIC|
|Citation:||Chemical Engineering Transactions. Italian Association Of Chemical Engineering - Aidic, v. 17, n. , p. 1639 - 1644, 2009.|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.