Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Nanocomposites Derived from Cellulose Acetate and Highly Branched Alkoxysilane
Author: da Silva, CA
Favaro, MM
Yoshida, IVP
Goncalves, MD
Abstract: Highly branched alkoxysilane (HB) units were prepared in situ via a Michael-type reaction between pentaerythrithol triacrylate and aminopropyltriethoxysilane. These units were used as an inorganic component for the modification of cellulose acetate (CA) films using the sol-gel process. The thermal and dynamic-mechanical behaviors, the morphology, and the dimensional stability of the modified CA films were analyzed. The siloxane-modified CA films showed thermal stability similar to pure CA, but the residue content at 900 degrees C increased with the addition of HB units. The morphology of these films was characterized by siloxane nanodomains dispersed in the CA matrix, with good interfacial adhesion between the phases. Moreover, the CA/siloxane nanocomposite films showed improved dimensional stability in comparison with CA, i.e., in the presence of HB, the dimensional change was reduced to around 50% of the value observed for pure CA. Finally, a complex dynamic-mechanical behavior was obtained for the nanocomposite films, as a consequence of the heterogeneous morphology. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 121: 2559-2566, 2011
Subject: cellulose acetate
sol-gel process
Country: EUA
Editor: Wiley-blackwell
Citation: Journal Of Applied Polymer Science. Wiley-blackwell, v. 121, n. 5, n. 2559, n. 2566, 2011.
Rights: fechado
Identifier DOI: 10.1002/app.33974
Date Issue: 2011
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOS000291598100009.pdf698.01 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.