Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Correlation between light intensity and exposure time on the hardness of composite resin
Author: Sobrinho, LC
de Goes, MF
Consani, S
Sinhoreti, MAC
Knowles, JC
Abstract: This study evaluated the correlation between light intensity emitted by the curing units and exposure time on the of degree polymerization of dental composites by measured Knoop hardness. Specimens with 5 mm diameter and 2 mm height were prepared in a copper mold, covered with a mylar strip and polymerized for 30 sec by curing units with 50, 130, 180, 220, 280 and 520 mW/cm(2), respectively. The output for all units was measured using a Curing Radiometer (Demetron). Other specimens were polymerized for 45, 60, 75, 90, 105, 120, 135, 150, 165 and 180 sec utilizing units of 130, 220 and 280 mW/cm(2). Knoop hardness values of the top and bottom surfaces were measured after 24 h. The results indicate that the curing units with higher light intensity presented improved values of Knoop hardness on the top and bottom regions. As expected, the top surface always presented improved Knoop hardness values in relation to the bottom, after exposure for 30 sec. The values obtained on the surface were statistically superior compared to the values on the bottom (p < 0.05) for the intensity of 130, 220 and 280 mW/cm(2) after 30, 45 and 60 sec of exposure. (C) 2000 Kluwer Academic Publishers.
Country: Holanda
Editor: Springer
Citation: Journal Of Materials Science-materials In Medicine. Springer, v. 11, n. 6, n. 361, n. 364, 2000.
Rights: fechado
Identifier DOI: 10.1023/A:1008981907601
Date Issue: 2000
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOS000087371700005.pdf134.92 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.