Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Microstructure and mechanical behavior of in situ Ni-Ni3Si composite
Author: Dutra, AT
Ferrandini, PL
Caram, R
Abstract: Composite materials allow one to associate fragile and ductile phases in order to obtain a good combination of properties. In situ composites obtained through eutectic transformation may present a combination of phases under a condition of equilibrium. Samples of the eutectic Ni-Ni3Si alloy were arc-melted and characterized in the as cast and directionally solidified (DS) conditions. The as cast microstructure was refined and uniform, while the DS microstructure was aligned in the direction of heat extraction and presented a plane solid/liquid interface. The alloy displayed an interesting combination of relatively high strength and tensile ductility at room temperature (3.7% total strain; UTS = 8 10 MPa), and a modulus of elasticity E = 264 MPa. High temperature tests showed that the yield strength decreased almost linearly as the temperature rose. No brittle to ductile transition temperature was found. (c) 2006 Elsevier B.V. All rights reserved.
Subject: composite materials
intermetallic compounds
mechanical properties
Country: Suíça
Editor: Elsevier Science Sa
Citation: Journal Of Alloys And Compounds. Elsevier Science Sa, v. 432, n. 41671, n. 167, n. 171, 2007.
Rights: fechado
Identifier DOI: 10.1016/j.jallcom.2006.06.019
Date Issue: 2007
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOS000245486300035.pdf798.99 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.