Please use this identifier to cite or link to this item:
|Type:||Artigo de evento|
|Title:||Effect Of Two Diferrent Periods Immersion Periods And Formation Oxide Film Upon The Corrosion Resistance Of Both Pure Zn And Al Specimens [efeito De Dois Diferentes Períodos De Imersão E Formação De Filme De óxido Sobre A Resistência à Corrosão De Amostras De Zinco E Alumínio]|
|Abstract:||The corrosion behavior in some metallic materials can be changed through active to passive due to surface oxide film formation. For instance, pure Aluminum and Zinc present spontaneously oxide film formation at the sample surface when immersed in the corrosive environment. It is suggested that the corrosion performance of these passive materials involve simultaneous chemical dissolution and formation of the oxide at the oxide/environment and oxide/metal interfaces. The aim of the present work is to investigate the effect of oxide films upon the electrochemical corrosion response for both pure metals, presenting different grain morphologies, immersed in two different periods. The specimens were immersed in a 3% NaCl solution and monitored for two different periods. The electrochemical impedance spectroscopy and polarization methods were performed after the immersion period. Specimens were also examined by scanning electron microscopy to reveal the oxide film. It was found that Zn and Al samples were, respectively, corroded by general and pitting dissolution. Measurements of the solution pH values are also discussed. It was found, that the electrochemical resistance decreases with increasing immersion time along a certain initial period, increasing again after that.|
|Citation:||58th Congresso Anual Da Abm (associacao Brasileira De Metalurgia E Materiais). , v. , n. , p. 576 - 585, 2003.|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.